In order to improve the production of a full set of aerated brick equipment aerated brick, first of all, we should know that several factors affecting the mild and quality of the aerated brick, so as to start from the corresponding influencing factors, find the reasons for improvement.

1, raw materials are too thick. The raw materials used in the production of aerated concrete block equipment are sand and fly ash, etc. If the sand in use is too thick and the fly ash is too fine, the middle part of the block will lack of effective material filling, which will cause the block strength is not enough. According to the research: if the grain gradation of sand is changed, the strength difference between high and low can be as high as 7 times under the condition of constant CaO content. So you can increase the strength by improving the thickness of the material.

2, the density of raw materials. The strength of aerated concrete block and the density of raw materials also have a great influence. In the production of aerated concrete block equipment, the greater the density of raw materials, the smaller the porosity, and the less water is needed in the mixing slurry. That is to say, the slurry can have a smaller water-material ratio, which can improve the strength of the product.

3. Production equipment and process flow. Production equipment and technology also have a certain influence on the strength and quality of the aerated block. The whole production process is divided into batching, mixing, pouring, rest, cutting, steaming and other steps, each process is complementary, if the quality of production equipment is not up to standard, the strength and quality of its products have a great impact. So we should choose a full set of equipment for the production of aerated brick.

Sangong is a manufacturer providing full set of aerated brick equipment, if you need to purchase full set of aerated brick equipment, then you can contact us sangong, we look forward to your call.